[Security Firewall] Admin interface from two zones

[John Locke]

Hi again,

On the MNF2, I'm using the admin interface, both the web site and the 
SSH interface, from the WAN zone. I've set up an ACCEPT rule for these 
two ports, allowing connections from my public IP address.

I originally set up the "Admin" interface to be eth0, which is on the 
LAN zone (eth1 is the WAN interface), but now on the web site eth1 is 
listed as the admin interface.

After adding appropriate rules, I can connect to the web interface from 
both LAN and WAN zones, but it's not allowing SSH access from the LAN zone.

I turned on logging for the firewall rule and verified that the firewall 
is allowing the LAN zone to connect to port 222, but SSH isn't allowing 
it to connect. How can I grant permanent access to both zones?

--
John Locke
"Open Source Solutions for Small Business Problems"
published by Charles River Media, June 2004
http://www.freelock.com


____________________________________________________
Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
____________________________________________________