[Cooker] [Bug 18935] [drakxtools] NEEDINFO: Brother HL-2030 does not stop printing white pages

[till]

User ID: 83, 12 bugs reported (222 fixed, 1 duplicate, 0 invalid), 1170 comments.

http://qa.mandriva.com/show_bug.cgi?id=18935


till@mandriva.com changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|UNCONFIRMED                 |NEEDINFO
     Ever Confirmed|0                           |1




------- Comment #1 from till@mandriva.com  2005-09-29 22:18 -------
Probably your printer was not recognized as the correct model by printerdrake.

Can you attach the PPD file which your printer got (/etc/cups/ppd/*.ppd) to
this bug report?

Can you run (as root)

usb_id_test /dev/usb/lp0  (can also be /dev/usb/lp1 ...)

if your printer is on USB or (also as root)

rmmod lp ppdev parport_pc parport
modprobe lp
cat /proc/sys/dev/parport/parport*/autoprobe*

if your printer is on a parallel port?

Printer must be connected and turned on before running the commands.


-- 
Configure bugmail: http://qa.mandriva.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.


------- Reminder: -------
assigned_to: till@mandriva.com
status: NEEDINFO
distribution: cooker
creation_date: 
description: 
2006 0.5 RC2
When I turn the Brother printer on, it gets automatically detected. I choose to
install it. This wents fine.
However when I start to print one page with OpenOffice, then it prints one white
paper after the other and will not stop until you turn it off.