[cooker-amd64] X-CD-Roast-0.98alpha14 error in error?

[Steve Hollingsworth]

I've been using the cited package to burn ISO (like Mandrake, doh) 
images onto CD-R.  When I do, the program produces a seemingly normal 
looking log, ejects the CD and then always displays:

"Error writing tracks"

I'm not sure how to test the CDs beyond the fact that I don't seem to 
have any problems reading them.  Is there a problem here I should do 
something about or is the error message in error or is it reporting that 
non-fatal conditions arose and calling the whole thing an error? If I 
should do things to make for a better test, I will.  If there is 
something I have here to report elsewhere, I'm happy to hear that, too.

This is an MSI system w/dual Opteron 240s.  I've been keeping current 
via urpmi, having started with 9.2 for AMD64-RC1.

Here's the full output from the most recent adventure:

Calling: /usr/lib64/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "2,0,0" 
gracetime=2 fs=16384k  -v -useinfo speed=4 -dao -eject -pad -data 
"/home/steve/bittorrent-CVS-shadowsclient/download/MandrakeLinux-9.2.1-specialclub-Download-cd2.i586.iso" 
...

scsidev: '2,0,0'
scsibus: 2 target: 0 lun: 0
Linux sg driver version: 3.1.25
SCSI buffer size: 64512
cdrecord: Input/output error. get_configuration: scsi sendcmd: no error
CDB:  46 00 00 21 00 00 00 01 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
Sense flags: Blk 0 (not valid)
Cdrecord-Clone 2.01a18-dvd (--) Copyright (C) 1995-2003 Jörg Schilling
cmd finished after 0.000s timeout 200s
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to 
<warly@mandrakesoft.com>.
Note: The author of cdrecord is not to be bothered with problems in this 
version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'LG      '
Identifikation : 'CD-RW CED-8080B '
Revision       : '1.06'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1024000 = 1000 KB
FIFO size      : 16777216 = 16384 KB
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
pregap1: -1
cdrecord: Permission denied. WARNING: Cannot set priority using 
setpriority().
Track 01: data   694 MB         padsize:   30 KB
cdrecord: WARNING: This causes a high risk for buffer underruns.
Total size:      798 MB (79:04.00) = 355800 sectors
Lout start:      798 MB (79:06/00) = 355800 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in:  -11634 (97:26/66)
ATIP start of lead out: 359848 (79:59/73)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 4048
Starting to write CD/DVD at speed 4 in real SAO mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
trackno=0
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Performing OPC...
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0

Track 01: writing  30 KB of pad data.
Track 01: Total bytes read/written: 728647680/728678400 (355800 sectors).
Writing  time: 1226.877s
Average write speed   3.9x.
Min drive buffer fill was 96%
Fixating...
Fixating time:   28.143s
cdrecord: fifo had 11477 puts and 11477 gets.
cdrecord: fifo was 0 times empty and 11221 times full, min fill was 99%.